Estereolitografia (SLA) e impressão 3D de processamento de luz digital (DLP) são os dois processos mais comuns para impressão 3D em resina. As impressoras de resina são populares por produzir protótipos e peças de alta precisão, isotrópicos e à prova d’água em uma variedade de materiais avançados com recursos finos e acabamento de superfície suave.
Características Técnicas
| BASIC INFORMATION | |
|---|---|
| Max Printing Size | 300*350*350mm |
| Machine Size | 94cm(W)*102cm(D)*192cm(H) |
| Rated Power Consumption | 1.2KVA |
| Machine Weight | About 780kg |
| LASER SYSTEM | |
| Laser Type | Solid-state frequency tripled Nd: YVO4 |
| Wavelength | 355nm |
| Power | Resin Surface Power≥ 300 mW |
| OPTICAL & SCANNING SYSTEM | |
| Scanning Mode | Germanic galvanometer scanner |
| Variable Beam System | Galvo/Closed-loop |
| Beam Size (diameter @1/e2) | 0.065-0.8mm (Variable Beam) |
| Max Scanning Speed | 12.0m/s |
| RECOATING SYSTEM | |
| Main Sturcture | Marble recoater frame, marble elevator holder and marble scanning system base |
| Coating Mode | Intelligent position vacuum recoating |
| Vertical Resolution Ratio | 0.0005mm |
| Repeat Positioning Accuracy | ±0.01mm |
| Layer Thickness | 0.05mm~0.25mm |
| Accuracy | L≤150mm, ±0.1mm; L > 150mm, ±0.1%*L |
| CONTROL SOFTWARE | |
| Motion Control System | Closed-loop |
| Machine Control Software | KINGS 3D control software |
| Input Data File Format | STL/SLC |
| Operating System | Windows 7/10 |
| Network Type and Protocol | Ethernet, TCP/IP |
| INSTALLATION CONDITION | |
| Electrical Requirement | 200-240VAC 50/60Hz, single-phase, 10A |
| Ambient Temperature | 20-26°C (72-79°F) |
| Relative Humidity | < 40%, non-condensing |
| First Tank Resin | About 80kg |
| WARRANTY | |
| Machine | Two years |
| Laser | Two years |
Avaliações
Ainda não existem avaliações.